|
I cut out a new hole for a new cable.
Date: 02/24/2006
Views: 131
|
This is a shot of the new hole from the inside. You may notice that I reversed the direction of the boot.
Date: 02/24/2006
Views: 91
|
I used an old AT TV (kickdown) cable that was lying around the garage from my AT->T5 swap.
Date: 02/24/2006
Views: 113
|
|
Installing the TV cable into the boot.
Date: 02/24/2006
Views: 93
|
Cable installed - snapped right in.
Date: 02/24/2006
Views: 117
|
I routed the cable under/above the seatbelt assembly. It is not binding or otherwise restricting the seatbelt.
Date: 02/24/2006
Views: 122
|
|
Cable under seatbelt assembly - covered.
Date: 02/24/2006
Views: 105
|
I fabricated a new lever to release the pin that holds the top down.
Date: 02/24/2006
Views: 89
|
Lever installed under the pin and cable hooked up.
Date: 02/24/2006
Views: 71
|
|
What the whole cable installation looks like.
Date: 02/24/2006
Views: 86
|
The lever assembly from underneath the cover (when closed). Looks fine. And works too!!
Date: 02/24/2006
Views: 136
|
|
