|
The car had just a one piece custom made exhaust pipe. There was no way to maintain or service the exhast because it was all welded together. And not exactly well (leaks, cracks). The pipe was also hitting the driveshaft and was too low in the rear, hitti
Date: 02/24/2006
Views: 129
|
I noticed an abandoned school bus by a recycling place so I ran up there with my generator and a grinder and cut off some parts that I knew I would need, flanges and some bends. Nothing beats free. :-)
Date: 02/24/2006
Views: 112
|
The old pipe, the bus pipe and a new cat, all ready for welding fun.
Date: 02/24/2006
Views: 123
|
|
When I was taking off the down pipes, the passenger side hearder-to-pipe bolts did not want to budge in the threads and twisted off instead. I had to grind them down, drill 'em out and tap new threads for new bolts. Not exactly much room up there to work
Date: 02/24/2006
Views: 98
|
Welding flanges onto the over-axle pipe.
Date: 02/24/2006
Views: 145
|
Over-axle pipe with new flanges.
Date: 02/24/2006
Views: 149
|
|
Finished intermediate pipe, from Y-pipe to the over-axle pipe.
Date: 02/24/2006
Views: 163
|
Intermediate pipe installed.
Date: 02/24/2006
Views: 131
|
New cat installed.
Date: 02/24/2006
Views: 122
|
